Installing Fixpaks using the IMAGE files.
Updated for CSF 141 and DSKXTRCT


These instructions cover The Device Driver Fixpak using the IBM recommended CSF 141
Utility in conjunction with a 3rd party utility to automate the installation process.

This method may also be used to apply fixes to PEER Services, MPTS and TCP/IP Services in Warp 4

NOTE: There are always occasional reports from users with every
Fixpak ever released regarding problems when installing Fixpaks.

While no guarantees are made, the method described below has been
successfully used by myself, to apply Fixpak 12 to a Warp 4 System.

What you Need
    A copy of FastKick updated for CSF141
    The diskette image files for the Fixpak
    A copy of DSKXTRCT

Step by Step Instructions


 HINT: Since this method may be used to install all Fixpaks
to all services of OS/2 Warp, create a permanent Directory to hold the utilities
FASTKICK and DSKXTRCT.

    4.UNZIP fastkick141.zip to its own directory

    5.UNZIP dskxtrct12.zip to its own directory

    6.Create a directory from which to install the Fixpak from

    7.Copy all of the Image Files for the Fixpak into this directory

    8.Copy the files from the FASTKICK directory into this directory

    9.Copy dskxtrct.exe from the DSKXTRCT directory into this directory

    10.From an OS/2 Command prompt, in the installation directory, enter the following:

    dskxtrct /s:*.*dk /t:. /ra

    11.Run FIX.CMD

    Unless otherwise noted, all content on this site is Copyright © 2004, VOICE